China's Plastic Extruder Products And Strategic New Industries Are Closely Linked
China's Plastic Extruder products and strategic new industries are closely linked
Due to the inconvenience of the Plastic Extruder, it is possible to detect the degree of wear of the threaded element and the inner sleeve of the barrel at any time, so that it can be effectively repaired or replaced. It is not found in the extrusion product problems, resulting in unnecessary waste. In the equipment maintenance, the ordinary twin-screw extruder often have to first heat, cooling system removed, and then the whole out of the screw. And split-type twin-screw is not used, as long as the release of a few bolts, turn the worm box handle device lift the upper part of the barrel to open the entire barrel, and then repair. This shortens the maintenance time and reduces the labor intensity.
Plastic Extruder in the use of six months after the time to conduct a comprehensive inspection, check all the tightening of the screw. If the sudden power outage in the production, the main drive and heating to stop, when the resumption of power supply, the cylinder must be re-heated to the provisions of the temperature and insulation for some time before the start of the extruder.
It is forbidden to extend your finger into the inlet at the start of the Plastic Extruder, and the auxiliary tool must be used for feeding. Do not move or damage the warning signs installed on the machine. Excessive fatigue, drinking or taking drugs that affect the central nervous system after the ban on job. Work, we must concentrate, not allowed to look around, whispering, string Kong chat with others or play play. Please wear work clothes and safety equipment before work. No unit or individual may dismantle or alter any safety protection device without the permission of the safety department. Special work If you need two or more people to complete, should be unified command, pay attention to mutual coherence.
For Plastic Extruders, it can be said that the production of Plastic Extruder factory is very common, almost certainly in all the accessories, but only the screw this device is the most widely used. At the same time, with the screw Plastic Extruder application value gradually increased for people to pay attention.
Basic daily life, many customers require the life of the Plastic Extruder, because this machine as long as you have the best and powerful screw. But now, the quality of the screw is getting more stringent, if not screw extruder, then a lot of screws are less than real life and work. After all, in practice, some of the basic properties of the screw are a clear specification, but the specification will depend on the Plastic Extruder manufacturer.
The customer gets some good screw, very eager to deal with the quality of the screw only through the realization of the Plastic Extruder. In the number of customers, now people's point of view at the same time, the quality of high-quality screw to determine the quality of the batch of products, but also determine the extent of the sale of such goods. Therefore, in the production of screw Plastic Extruder, the quality of the screw to provide the necessary protection, but also brought a very large profit customers.
In China, China is still in the industrialization, information, urbanization, marketization, internationalization in-depth development stage, is still in the development of an important strategic opportunity period, which will give the Plastic Extruder industry to provide an inexhaustible development momentum. China's Plastic Extruder market is developing rapidly, but the proportion of extruder exports is still low. Rising raw material costs and energy costs pressure, so that energy saving, materials become the focus of extrusion processing industry. At the same time, extrusion technology suppliers can develop a variety of different angles from the rich energy-saving programs to maximize the user's energy needs to meet.
The current status of the development of the domestic Plastic Extruder industry is the existence of independent innovation capacity is low, high-grade and personalized special varieties less, low concentration of these industries. The existence of these problems led to China's plastics machinery industry is not as soon as possible to catch up with the level of foreign plastic machinery. As China's Plastic Extruder products and strategic new industries are closely linked, with high efficiency, energy-saving advantages and high cost, the export of developed countries to the low-end, this part of the consumer demand is rigid, and therefore, Machine industry development still has a larger market space.
China's Plastic Extruder products and strategic new industries are closely linked, with high efficiency, energy-saving advantages and high cost, exports to the developed countries in the low-end, this part of the consumer demand is rigid, and therefore, plastic extrusion Machine industry development still has a larger market space.