Development Strategy Of Plastic Pipe Production Line
To implement the efficient and green Plastic Pipe Production Line development strategy, first of all to take the road of resource-saving development, change a single extensive Plastic Pipe Production Line for the combination of intelligent Plastic Pipe Production Line. Not only from the Plastic Pipe Production Line on the fundamental transformation process, but also a comprehensive, multi-level energy-saving technological transformation, and vigorously develop the application of renewable energy and industrial waste heat of the latest Plastic Pipe Production Line technology.
After the long-term exploration of the Plastic Pipe Production Line, the new development path of the Plastic Pipe Production Line technology must comprehensively consider the energy efficiency, environmental protection and the quality of the products in order to achieve comprehensive, coordinated and sustainable development. To implement the development strategy of efficient and green Plastic Pipe Production Line, take the resource-saving development path, change the single extensive Plastic Pipe Production Line for the combination, the intelligent Plastic Pipe Production Line, establish the quick customer feedback and the market investigation mechanism to the market and the customer Demand for the program to speed up the development of energy saving and environmental protection Plastic Pipe Production Line technology application. Recently, our company through extensive market research, increased the granulator electromagnetic heating technology and dust and dust integrated processing technology development.
China's latest Plastic Pipe Production Line of specialized production has developed rapidly, and product variety to diversify the development. Experts pointed out that high-precision press is the R & D target, to integrate more electronic technology, network technology, to achieve automatic control of the machinery will become the protagonist of the future market.
Plastic melt from the temperature or concentration, are relatively uniform. So the Plastic Pipe Production Line will require the pressure of the force is large enough, and the material adhesion exists in one or more between the polymer. After the plastic passes through the screw and the helical path, the Plastic Pipe Production Line completes most of the work from the side of the barrel. Plastic material in the passage through the barrel of a section into the channel, it can be transported through the screw into the other end. In this will produce enough pressure, the thread on the screw with the depth and scale changes in the distance generated on the hopper will decline. Plastic Pipe Production Line The external heating work is the presence of friction between the plastic and the screw.
Plastic Pipe Production Line in the use of a dedicated manufacturing, will become another more important issue. So in order to ensure the quality of a product for the quality of the product. When the pipe production equipment is used to be added to a certain amount of material, the plastic extruder thus forms an unsaturated chemical fiber composite material for use as a dedicated production equipment. In fact, in the traditional corresponding position will have a certain synchronous work, twin-screw pipe extruder so it can be used to control the servo.
The front end of a Plastic Pipe Production Line as a polymer is a special type of pipe for a tapered pipe, and a T-shaped pipe for the nose. With the application of polymer sheets in China at an increasing rate, it will be a manifestation of the distribution of a speed on the pipe head of the pipe and creates a large pipe on the pipe Processing molding more difficult situation.
As the Plastic Pipe Production Line is not convenient to open, so can always find the threaded components, barrel liner wear degree, so as to effectively repair or replacement. It is not found in the extrusion product problems, resulting in unnecessary waste. In the equipment maintenance, the ordinary twin-screw extruder often have to first heat, cooling system removed, and then the whole out of the screw. And split-type twin-screw is not used, as long as the release of a few bolts, turn the worm box handle device lift the upper part of the barrel to open the entire barrel, and then repair. This shortens the maintenance time and reduces the labor intensity.
Plastic Pipe Production Line in the use of six months after the time to conduct a comprehensive inspection, check all the tightening of the screw. If the sudden power outage in the production, the main drive and heating to stop, when the resumption of power supply, the cylinder must be re-heated to the provisions of the temperature and insulation for some time before the start of the extruder.