To Achieve Plastic Pipe Production Line Automation Unmanned Production
To achieve Plastic Pipe Production Line automation unmanned production
According to the production characteristics of Plastic Pipe Production Line, specifically for the realization of Plastic Pipe Production Line automation unmanned production and research and development of equipment. In the conservation of labor costs, improve the safety of labor and equipment to maintain product capacity, quality, process stability and other aspects of modern Plastic Pipe Production Line "pioneering and innovative" an important manifestation of the spirit.
Plastic Pipe Production Line Feeding area: fixed screw groove of the groove deep, its function is responsible for preheating and plastic solid conveying and pushing. It must be ensured that the plastic begins to melt at the end of the feed section - that is, to preheat to the melting point. (PA, POM, PE, PP, CA) of about 48 ~ 58% L, plus glassy nature of about 45 ~ 55% of the non-crystalline (AS, ABS, ps) L.
Plastic Pipe Production Line compression zone: tapered screw screw groove deep, its function for the plastic raw materials melting, mixing, shear compression and pressurized exhaust. Plastic in this paragraph will be completely dissolved, the volume will be reduced, so the design of the degree of compression is very important. (PA, POM, PE, PP, CA) of about 22 ~ 32% L, plus about 28 ~ 40% L of glass, , Heat sensitivity (PVC) 100% L.
Plastic Pipe Production Line metering area: screw screw groove fixed groove deep, the main function of mixing, melt conveyor, measurement, but also must provide adequate pressure to maintain the uniform temperature of molten rubber and stable flow of molten plastic. (PA, POM, PE, PP, CA, etc.) of about 48 ~ 58% L, plus about 45 ~ 55% glass, and the proportion of non-crystalline (AS, ABS, PS) L.
Although the Plastic Pipe Production Line screw can be functional or geometric appearance to distinguish, but the actual plasticization process, the overlapping function of each section, it is difficult to distinguish between the interval. The study of plastic screw, nothing more than want to: improve the role of cutting and mixing, improved uniform mixing, improve the plasticizing capacity, improve the melt temperature uniformity. When the depth of the feed section deepened the greater the amount of deep, but the screw required greater torque; feed segment depth is too shallow, the amount of delivery is not enough, compression ratio is insufficient. When the measurement section is too deep, the compression ratio is insufficient, the required feeding power is large; too shallow when too easy to burn and burn. The average tooth depth is about 0.03 to 0.07 times the screw diameter. Therefore, plastic plastic screw has the function of conveying, melting, kneading, compressing and measuring, and plays a very important role in plasticizing quality.
The characteristics of the Plastic Pipe Production Line not only reflected in the shape, as well as some of the daily production of abnormal treatment have changed above, the application of Plastic Pipe Production Line to eliminate the occurrence of security incidents, but also to achieve a standard automation, intelligent artificial production Into a modern enterprise production automation. High cost of labor, low efficiency, waste of materials, recruitment and so are the problems faced by enterprises, and the application of Plastic Pipe Production Line is more reliable, more secure, more stable, of course, continue to work more to the company to bring high-performance production Ability, but also to greatly reduce the cost of production, but also to the company more competitive.